The biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action. If you don't want to bother, with all this, then we have another idea...Just call Hancock Plumbing	Come talk to us over on Facebook and Twitter! We answer questions daily, as well as post helpful plumbing hints and tricks to make your life easier when tackling the toughest of plumbing issues!
			If you are using a plunger, trying to unblock a blocked sink, cover up the overflow holes with a damp cloth. It helps build up the pressure. Remember to use PTFE tape when fixing a leak or making joints. The tape should be wrapped around the thread of the pipe. Clockwise when viewed from the end of pipe. If the water pressure is very poor in your shower it may be due to lime-scale build up. If you live in a hard water area you should clean your shower heads every 3 months or so
		A higher than normal water bill might be your first indication of a leaking pipe. When you suspect a leak, check the fixtures first to make sure all the faucets are tightly closed. Go to the water meter, If the dial is moving, you're losing water somewhere.